AP3402的應用
電路是2A降壓DC-DC
轉換器。在重負載時,恒頻PWM控制具有出色的穩定性和瞬態響應。無需外部補償元件。 AP3402 支持 2.7 至 5.5V 的輸入電壓范圍,允許使用單個 Li+/Li-
聚合物電池、多個堿性/NiMH 電池和其他標準
電源。輸出電壓可在 0.6V 至輸入電壓之間調節。 AP3402 采用內部電源開關和
同步整流器,最大限度地減少外部部件數量并實現高效率
說明
-
Application circuit for AP3402 is a 2A step-down DC-DC converter. At heavy load, the constant frequency PWM control performs excellent stability and transient response. No external compensation components are required. The AP3402 supports a range of input voltages from 2.7 to 5.5V, allowing the use of a single Li+/Li- polymer cell, multiple Alkaline/NiMH cell, and other standard power sources. The output voltage is adjustable from 0.6V to the input voltage. The AP3402 employs internal power switch and synchronous rectifier to minimize external part count and realize high efficiency
主要特色
-
Conversion Type
DC to DC
-
Input Voltage
2.7 to 5.5 V
-
Output Voltage
1.8 V
-
Output Current
2 A
-
Efficiency
95 %
-
Topology
Buck