STDES-7KWOBC 是一款車載充電器 (OBC) 參考設計，可通過家用交流電源插頭或私人/公共插座（交流充電站）為電動汽車 (EV) 的電池充電。

參考設計嵌入了兩個部分：帶有 SiC 的交錯圖騰柱 PFC 和基于 MDmesh DM6 超結功率 MOSFET 的雙電流隔離 LLC DC-DC ZVS 諧振轉換器。

電源平臺是一個 7 kW 模塊，能夠在輸出端提供恒定電流 (CC) 或恒定電壓 (CV)，可用作獨立 (1 PH+ N)、并聯或三相模式 (3Ph + N)，以達到 21 kW。
鋁基板上的底層絕緣金屬基板可實現非常有效的散熱、強制或液體冷卻。
組成參考設計的每個模塊都允許通過電線或母線連接在相同類型的模塊之間輕松互連，從而達到更高的輸出功率。
該參考設計的關鍵因素是效率和高功率密度，這得益于 SiC 和 SJ 功率 MOSFET、硅和 SiC 二極管、柵極驅動器、SPC58NN84E7 功率架構汽車級微控制器以及用于限制浪涌電流的 SCR 晶閘管。
STDES-7KWOBC 是專為性能評估而開發的全組裝套件，不對外出售。

所有功能
前端 PFC 級采用 2 通道交錯圖騰柱拓?fù)浣Y(jié)構，工作頻率為 70 kHz
數字浪涌電流控制
DC-DC 級采用 FB LLC 諧振拓?fù)浣Y(jié)構，諧振頻率為 140 kHz
恒流和恒壓模式
基于 SPC58NN84E7 的控制級
12 V 輸入電源電壓與輸出電壓 GND（高壓電池）電隔離
母線互連可能性
符合 RoHS 標準
PFC：
主要產品：TN3050H-12GY-TR SCR、STBR3012G2Y 旁路二極管、SCTH35N65G2V-7AG SiC 功率 MOSFET
輸入：85 至 265 VAC，45 至 65 Hz
數字浪涌電流限制器
最大輸入電流：32 Arms
開關頻率：70 kHz
連續導通模式 (CCM) 下的平均電流模式控制
PID 或 2p2z 2x 獨立電流環路調節器
PID 或 2p2pz 電壓調節器
SPC58NN84E7 MCU 控制器
DC-DC：
主要產品：STH47N60DM6-7AG 功率 MOSFET、STPSC20065GY-TR 輸出二極管、A6387 柵極驅動器
輸出電壓：250 至 450 VDC
開關頻率：92 至 250 kHz，啟動頻率為 350 kHz
兩個獨立電流環路 (CC)
一個電壓環路加電流平衡 (CV)
PID 調節器
SPC58NN84E7 MCU 控制器

The STDES-7KWOBC is an on-board charger (OBC) reference design which allows charging the battery of electric vehicles (EV) through your home AC mains plug or a private/public outlet (AC charging station).

The reference design embeds two sections: an interleaved totem pole PFC with SiC and a dual galvanic isolated LLC DC-DC ZVS resonant converter, based on MDmesh DM6 super-junction power MOSFETs.
The power platform is a 7 kW module able to deliver a constant current (CC) or constant voltage (CV) on the output to be used as standalone (1 PH+ N), in parallel or in 3-phase mode (3Ph + N) to reach 21 kW.
The underlying insulated metal substrate on aluminum base plate enables very effective heat dissipation, forced or liquid cooling.
Each module composing the reference design allows an easy interconnection among modules of the same type through wires or bus bar connection, reaching a higher output power.
This reference design key factor is the efficiency and high-power density gained thanks to SiC and SJ power MOSFETs, silicon and SiC diodes, gate drivers, the SPC58NN84E7 power architecture automotive-grade microcontroller, and SCR thyristors for inrush current limitation.
The STDES-7KWOBC is a fully assembled kit developed for performance evaluation only, not available for sale.

所有功能
Front end PFC stage using 2-channel interleaved totem pole topology operating at 70 kHz
Digital inrush current control
DC-DC stage using FB LLC resonant topology with 140 kHz resonant frequency
Constant current and constant voltage mode
Control stage based on SPC58NN84E7
12 V input supply voltage galvanically isolated from output voltage GND (high voltage battery)
Bus bar interconnection possibility
RoHs compliant
PFC:
Key products: TN3050H-12GY-TR SCRs, STBR3012G2Y bypass diodes, SCTH35N65G2V-7AG SiC power MOSFET
Input: 85 to 265 VAC, 45 to 65 Hz
Digital inrush current limiter
Max. input current: 32 Arms
Switching frequency: 70 kHz
Average current mode control in continuous conduction mode (CCM)
PID or 2p2z 2x independent current loop regulators
PID or 2p2pz voltage regulator
SPC58NN84E7 MCU controller
DC-DC:
Key products: STH47N60DM6-7AG power MOSFET, STPSC20065GY-TR output diodes, A6387 gate driver
Output voltage: 250 to 450 VDC
Switching frequency: 92 to 250 kHz with start-up at 350 kHz
Two independent current loops (CC)
One voltage loop plus current balancing (CV)
PID regulators
SPC58NN84E7 MCU controller