NCP12510B65GEVB 演示板是一款反激式拓?fù)?a href="http://weightgang.cn/zhuanti/SGeP0S" style="color: #4595e6;" target="_blank">開關電源，用于演示由 NCP12510 控制器控制的電源的高效率和低空載輸入功耗。演示板的工作輸入電壓范圍為 90 Vac 至 265 Vac，可提供 19 V 的輸出電壓和高達 3.5 A 的輸出電流?？刂破?NCP12510B 是高度集成的電流模式 PWM 控制器，具有自動恢復 OCP 保護功能?？刂破鞯拈_關頻率為 65 kHz，額定輸出功率。當輸出功率降低時，控制器會自動將其開關頻率折回最小值 26 kHz，并以跳躍模式啟動操作，以實現低空載輸入功耗?？刂破髋鋫淞嗽S多保護功能（OCP、OVP、OTP、OPP），以確保電源的安全運行。此外，NCP12510 控制器的高穩健性和高 ESD 能力有助于電源的安全運行。

The NCP12510B65GEVB demonstration board is a flyback topology switched-mode power supply for demonstration of high efficiency and low no-load input power consumption of the power supply controlled by the NCP12510 controller. Demonstration board works in input voltage range from 90 Vac to 265 Vac and provides the output voltage 19 V up to 3.5 A output current. The controller NCP12510B is highly integrated current mode PWM controller with auto-recovery OCP protection. The switching frequency of the controller is 65 kHz for nominal output power. When the output power is decreasing, the controller automatically fold backs its switching frequency to the minimum 26 kHz and initiated the operation in skip mode for low no-load input power consumption. Controller is equipped by a lot of protections (OCP, OVP, OTP, OPP) for ensure the safety operation of the power supply. Moreover, the high robustness and high ESD capability of the NCP12510 controller contributes to the safety operation of the power supply.