STR-NCD98010-GEVB 為使用 Strata Developer Studio 的 NCD98010 驅動器提供了評估板。NCD98010 是一款超低功耗 12 位 SAR ADC，最高運行速度可達 2MSPS。NCD98010 采用小型 1.5mm x 1.5mm DFN 封裝。該評估板與 Strata 一起使用，用于控制 NCD98010 并提供不同時鐘速度和電源電壓的動態性能指標。有關更多詳細信息，請參閱 Strata 網頁 www.onsemi.com/strata！單擊下載 Strata 功能和應用 功能 12 位模擬數字轉換 - 全差分輸入 - 低 2pF 輸入電容 數字 SPI 接口 - 提供有符號和無符號輸出格式 分離模擬/數字電源 - 數字和模擬電源可單獨供電，電壓范圍為 1.65V 至 3.6V 低功耗 - 100 kSPS 時為 7uA - 模擬電流消耗 可以降至納安，時鐘速率較低 小封裝尺寸 - 1.5 x 1.5 毫米 8 引腳 X2QFN 預校準 應用 低功耗數據采集 - 電池供電設備 - 液位傳感器 - 超聲波流量計 - 電機控制 - 可穿戴健身設備 - 便攜式醫療設備 - 血糖儀

The STR-NCD98010-GEVB provides an evaluation board for the NCD98010 driver using Strata Developer Studio. The NCD98010 is a ultra low power 12-bit SAR ADC that can run at up to 2MSPS. The NCD98010 comes in a small 1.5mm x 1.5mm DFN package. This evaluation board is used with Strata to control the NCD98010 and to provide dynamic performance metrics for different clock speeds and supply voltages. See the Strata webpage at www.onsemi.com/strata for more details! Click to Download Strata

Features 12-bit Analog to Digital Conversion - Fully Differential Input - Low 2pF Input Capacitance Digital SPI Interface - Available in Signed and Unsigned Output Formats Split Analog / Digital Supplies - Digital and Analog Supplies can be Supplied Separately from 1.65V to 3.6V Low Power Consumption - 7uA at 100 kSPS - Analog Current Consumption CAN to go down to nano-amps with Slower Clock Rates Small Package Size - 1.5 x 1.5 mm 8-pin X2QFN Pre-Calibrated

Applications Low-Power Data Acquisition - Battery-Powered Equipment - Level Sensors - Ultrasonic Flow Meters - Motor Controls - Wearable Fitness Devices - Portable Medical Equipment - Glucose Meters